DHC Bass

2×6.5 Polypropylene 170* Watt Bass Cabinet

£180.00

2×6.5 Polypropylene 170* Watt Bass Cabinet

SKU: 170-POLY-2X6.5 Category:

Description

2×6.5 Polypropylene 170* Watt Bass Cabinet

LF Driver: Polypropylene
HF Driver: Peerless 2.5″
Impedance: 16
RMS Power Handling: 170*
Hz Range: 35 – 16,500
Height: 25
Width: 48
Length: 40
Weight (kg): 11
Quality Assurance: Tested and supplied before so sound quality is assured.

This cab is designed to be used as a really clean sounding practice cab. With full range frequency response at low listening levels it is ideal for use where high sound levels can be problematic but with 170 watt power handling it is capable of pairing with other cabinets to give a mid to top end lift to your live sound.

The higher impedance reduces the power output from a solid state amp for home practise and shares the power with 8 ohm cabs. E.g. 8 Ohm + 16 Ohm (12 or 15” Bottom) = 5.3 Ohms which drives more power from your amp and the higher power cab takes 66% with this 2 x 6.5 taking 34%.

That’s 300 watts to the big cab and 150 watts to the top cab. Total 450 watts RMS

Cabinets are constructed using 18mm ply throughout with ultra-strong bonded and screwed seams creating ridged, rattle free cabinets.

Handle apertures act as bass vents. In addition to making the cabs easy to lift and carry they are positioned to let cooling air flow to the speaker. On stage they send low frequency
sideways which doesn’t muddle the sound you hear. No metal or plastic handles are used which require large apertures (reducing cabinet stiffness) and no port tubes (which weaken
the baffle board). This also reduces weight and avoids screw heads which can damage other gear or car/van surfaces.

The painted steel grill is mounted on rubber and is removable for servicing.

The HF speaker switch is mounted on the right hand side for easy reach while setting your sound.

Two Speakon sockets are deeply recessed for protection in the rear of the cab.

The cabs are finished in mid sheen black “Tuf Cab”. This can be refinished at the DHC workshop if life on the road has taken its toll.

Additional information

Weight11 kg
Dimensions40 × 48 × 25 cm
LF Driver

Polypropylene

HF Driver

Peerless 2.5"

Impedance

16

RMS Power Handling

170*

Hz Range

35 – 16, 500

W/O HF Driver

£ 160

Lead Time

10 days if not in stock

Quality Assurance

Tested and supplied before so sound quality is assured.

Product

2×6.5

Reviews

There are no reviews yet.

Be the first to review “2×6.5 Polypropylene 170* Watt Bass Cabinet”